Free Metal Work Exam Questions and Answers for SS2
These Metal Work questions and answers were pulled from our book (Metal Work questions for ss2); Compiled to serve as a reference material to help teachers draw up test and exam questions faster. It could also help students assess their level of exam preparation. Each sample question includes correct answers.
Sample Metal Work Exam Questions and Answers
BASIC FABRICATION PROCESS
1. Sharp edges in sheet metal are removed by ________.
A. etching
B. filing
C. chiseling
D. polishing
E. planishing
2. The process used to make objects such as bowls and trays is known as ________.
A. planishing
B. raising
C. hollowing
D. fullering
3. The mallet used for shaping internal curves in metal work is _______.
A. bossing mallet
B. raising mallet
C. rawhide mallet
D. planishing
4. Which of these snips is not used in sheet metal works?
A. Curved snip
B. Straight snip
C. Universal snip
D. Long snip
Click here to get the complete Mathematics questions for ss2
5. The stake used for forming cylindrical work is _______.
A. brick iron
B. funnel stake
C. hatchet stake
D. round bottom stake
CARE AND MAINTENANCE OF MACHINES
1. For a satisfactory joint, an M24 hexagonal bolt should be tightened to ________.
A. M24 screw
B. M24 stud
C. M24 socket
D. M24 nut
2. Check and lubricate the machine with ________.
A. available lubricant
B. any lubricant
C. recommended lubricant
D. unbranded lubricant
3. The clearance angle of the cutting tool for lathe machine is _______.
A. 10o
B. 6o
C. 12o
D. 8o
4. What do we use if it is necessary to use a hammer to hit loose or tighten some part of a machine?
i. Lead hammer
ii. Copper hammer
iii. A block of hard wood
A. i only
B. ii only
C. iii only
D. i, ii and iii
5. Proper handling of the machine will prolong the life of a machine. In a milling machine, operating the cutter backwards will result in _______.
A. blunt cutter
B. cutter removal
C. cutter clogging
D. cutter breakage
